The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Complete drain system with corner unit and Custom base. The unit has been updated for easier installation. Note: the drain unit fits only the HighLine Custom solution.

Attach the tile to the custom base using the glue supplied. Use the included spacers to position the base and tile correctly.

The replaceable inner container for the Reframe Collection Toilet brush ensures the most practical and hygienic solution for your bathroom. The plastic container has an external handle which ensures that you can empty the container of water without coming into contact with bacteria.

Toothbrush holder with a focus on hygiene. With a two-part insert, where one compartment holds the toothpaste tube in place, while the other is for the toothbrushes. The design ensures that the toothbrushes do not touch each other. The insert can be easily removed during cleaning. Non-slip surface.

The soap dispenser has a stable non-slip base. The design of the pump top ensures liquid soap is released wherever the pressure is applied. Oblique soap dispenser. The entire pump top can be removed to allow for cleaning and refilling. Instructions are included. Content: 200 ml.

Pedal bin with soft open/close lid, non-slip rubber ring at the bottom and specially designed pedal to ensure stability during use. The lid design prevents it from hitting the wall when opened. Removable insert with double-sided tape makes it easy to fit binbags inside. The bin’s mechanical parts are all on the inside, facilitating easy cleaning. A roll of binbags included. Volume 4 l.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The shower scraper comes with a magnetic hanger that mounts to the wall for smart storage. Part of the Reframe Collection by Unidrain, a series of bathroom accessories with roots in Danish design. The series is available in brushed and hand-polished steel, as well as in PVD-treated copper, brass and black.

Toothbrush holder with a focus on hygiene. With a two-part insert, where one compartment holds the toothpaste tube in place, while the other is for the toothbrushes. The design ensures that the toothbrushes do not touch each other. The insert can be easily removed during cleaning. Non-slip surface.

The soap dispenser has a stable non-slip base. The design of the pump top ensures liquid soap is released wherever the pressure is applied. Oblique soap dispenser. The entire pump top can be removed to allow for cleaning and refilling. Instructions are included. Content: 200 ml.

The soap dispenser has a stable non-slip base. The design of the pump top ensures liquid soap is released wherever the pressure is applied. Oblique soap dispenser. The entire pump top can be removed to allow for cleaning and refilling. Instructions are included. Content: 200 ml.

The soap dispenser has a sturdy and elegant wall mounting. The design of the pump top ensures liquid soap is released wherever the pressure is applied. Oblique soap dispenser. The entire pump top can be removed to allow for cleaning and refilling. Instructions, screws and dowels are included. Content: 200 ml.

The fine towel hooks are screwed onto the wall and ensure that the towels hang firmly without falling down. Part of the Reframe Collection by Unidrain, a series of bathroom accessories with roots in Danish design. The series is available in brushed and hand-polished steel, as well as in PVD-treated copper, brass and black.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

HighLine Color on valmistettu PVD-käsitellystä ruostumattomasta teräksestä. Runko on yhdistettävä paneeliin.

Unidrain Highline CUSTOM 700 -paneeli

Soap shelf including grating and mounting set. Designed for insertion in tile joint or for mounting in an existing shower cubicle. For corner installation only – applies to both models.

Poistoputki Unidrain Ø75 pystysuoralla ansalla.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

HighLine-väripinta messinki 900 mm. Toimitetaan paneelilla, jaloilla, nousimilla ja ruuveilla. Tulee koota ennen asennusta lattiakaivoon.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.