DJI Palvelu ja tuki

DJI Care Refresh provides one year of service protection for compatible DJI products, with up to two replacements of damaged equipment for an additional fee. Coverage includes damage caused by impacts and contact with water. Damaged equipment is replaced with a new or equivalent-new unit under the service terms. For DJI Action 3 cameras, the first replacement costs PLN 119 and the second PLN 185. These fees may vary with exchange rates when arranging service directly with the manufacturer. Activation must take place within 30 days of the device’s first activation. The additional 30-day activation period is not available for cameras, gimbals or stabilizers.

DJI Care Refresh provides two years of service protection for compatible DJI products, with up to four replacements of damaged equipment for an additional fee. Coverage includes damage caused by collisions and contact with water. Damaged equipment is replaced with a new or equivalent unit in accordance with the service terms. For the DJI RS 3 Mini, each replacement costs PLN 209, although the fee may vary with exchange rates when contacting the manufacturer directly. The plan must be activated within 30 days of the device’s first power-on. Coverage can be extended by one additional year through the purchase of another annual plan, bringing the total protection period to three years. The manufacturer’s warranty also applies during the service period.

DJI Care Refresh+ extends service protection for compatible DJI products by 12 months after the original DJI Care Refresh plan expires. During the extension period, one damaged product can be repaired or replaced for an additional fee. Coverage includes damage caused by operator error, contact with water, falls and signal interference during use. Replacement units are new or equivalent in appearance and performance, and DJI covers the transport costs for the service. DJI Care Refresh must still be active when Care Refresh+ is purchased, with at least one replacement remaining. The extension is linked to the device and is valid only in the country or region where it was purchased.

DJI Care Refresh provides service protection for compatible DJI devices, with up to two replacements of damaged equipment per year for an additional fee. Coverage includes damage caused by collisions and water contact. Replacements are supplied as new or equivalent-new hardware, subject to the service terms. The plan can be activated within 30 days of the device’s first activation and may be extended with additional one-year plans, up to a total of three years. For eligible devices, an unused Care Refresh period can also qualify for an additional year of manufacturer warranty. Activation requires the service code, device serial number and user details.

DJI Care Refresh provides one year of service protection for DJI Action 4 series cameras, covering accidental damage such as impacts and contact with water. The plan includes two replacements for an additional fee, with replacement costs of PLN 119 for the first replacement, PLN 185 for the second and PLN 249 for the third. Damaged equipment is replaced with a new or equivalent product. DJI Care Refresh must be activated within 30 days of the device’s first activation. Replacement requests are handled through DJI’s service centre, with priority shipping and free delivery for replacement units. Coverage is subject to the plan’s terms and exclusions.

DJI Care Refresh for Osmo Mobile 8P provides four replacements of damaged equipment over two years, subject to a fee of PLN 55 per replacement. The service covers accidental damage, including damage caused by the user. Activation must take place within 30 days of the device’s activation; later activation requires a verification video to be submitted to DJI. The plan can be extended once with an additional annual plan, providing up to three years of total coverage and a maximum of six replacements. Replacement fees may vary with the exchange rate when incidents are reported directly to DJI.

DJI Care Refresh provides one year of protection for DJI Osmo Action 3, covering accidental damage such as collisions and contact with water. The plan includes replacements for damaged equipment at an additional cost of PLN 95 per replacement. Damaged hardware is replaced with a new or equivalent unit. The service must be activated within 30 days of the device’s first activation. Protection can be extended to a maximum of three years by purchasing additional annual plans, subject to the extension conditions. The manufacturer’s warranty remains valid throughout the DJI Care Refresh service period.

DJI Care Refresh provides one year of service protection for compatible DJI products, with up to two replacements of damaged equipment for an additional fee. Coverage includes damage caused by impacts and contact with water. Damaged equipment is replaced with a new or equivalent-new unit under the service terms. For the DJI RS 3 Mini, the first replacement costs PLN 209 and the second PLN 249. These fees may vary with exchange rates when arranging service directly with the manufacturer. Activation must take place within 30 days of the device’s first activation. The additional 30-day activation period is not available for cameras, gimbals or stabilizers.

DJI Care Refresh provides one year of service protection for DJI Action 4 series cameras, covering accidental damage such as impacts and contact with water. The plan includes two replacements for an additional fee, with replacement costs of PLN 119 for the first replacement, PLN 185 for the second and PLN 249 for the third. Damaged equipment is replaced with a new or equivalent product. DJI Care Refresh must be activated within 30 days of the device’s first activation. Replacement requests are handled through DJI’s service centre, with priority shipping and free delivery for replacement units.

DJI Care Refresh provides two-year service protection for DJI Osmo Pocket 3, allowing damaged equipment to be replaced for an additional fee. The plan includes four replacements, each costing PLN 219. The fee may vary depending on the current exchange rate when a claim is reported directly to the manufacturer. Coverage can be extended to a maximum of three years by purchasing an additional annual plan, subject to DJI’s extension conditions. The service can be activated at any time, but activation more than 30 days after the device’s first activation requires a verification video. Replacement equipment is shipped on a priority basis, with shipping covered when the customer is located in the region where the plan was purchased.

DJI Care Refresh provides service protection for DJI Osmo Pocket 3, allowing damaged equipment to be replaced for an additional fee. The annual plan includes two replacements, while the two-year plan includes four. Each replacement costs PLN 219, although the fee may vary with the current exchange rate when reported directly to the manufacturer. Coverage can be extended to a maximum of three years, allowing up to six replacements across the full service period. Activation is available at any time, but activation more than 30 days after the device’s first activation requires a verification video. Replacement requests are handled through DJI’s service centre, with priority delivery and shipping covered when the customer is in the region where the plan was purchased.

DJI Care Refresh for Osmo Mobile 7P provides two replacements for damaged equipment within one year, subject to a replacement fee of PLN 55 per replacement. The service covers accidental damage, including collisions and contact with water, with damaged equipment replaced by new or equivalent hardware. Activation must take place within 30 days of the device’s first activation. The service can be extended with additional one-year plans, up to a total of three years. The manufacturer’s warranty remains valid throughout the service period.

DJI Care Refresh for Osmo Mobile 7P provides two replacements for damaged equipment within one year, subject to a replacement fee of PLN 55 per replacement. Coverage includes accidental damage caused by collisions and contact with water. Damaged equipment is replaced with new or equivalent hardware. The service must be activated within 30 days of the device’s first activation and can be extended with additional one-year plans for up to three years of total coverage. The manufacturer’s warranty remains valid throughout the service period.

DJI Care Refresh provides one year of service protection for DJI Osmo Mobile 7 series devices, covering damage such as collisions and contact with water. The plan includes two replacements for an additional fee of PLN 39 per replacement. Damaged equipment is replaced with a new or equivalent unit. The service must be activated within 30 days of the device’s first activation. Protection can be extended to a maximum of three years by purchasing additional annual plans. The manufacturer’s warranty remains valid throughout the service period. Eligible devices may also receive an additional year of warranty if the replacement service is not used during the coverage period.

DJI Care Refresh for Osmo Mobile 8P is a two-year service plan that allows up to four replacements of damaged equipment for a fee of PLN 55 per replacement. Coverage includes accidental damage, including damage caused by the user. If activated within 30 days of the device’s activation, no verification video is required. The plan can be extended with an additional annual plan for up to three years of total coverage, allowing up to six replacements. Replacement fees may vary with exchange rates when an incident is reported directly to DJI.

DJI Care Refresh for Osmo Mobile 8P provides two replacements of damaged equipment during the one-year coverage period, subject to a replacement fee of PLN 55 per replacement. The service covers accidental damage, including damage caused by the user. Activation must take place within 30 days of the device’s activation; later activation requires a verification video to be submitted to DJI. Coverage can be extended twice with additional annual plans, providing up to three years of protection and a maximum of six replacements. Replacement fees may vary with the exchange rate when incidents are reported directly to DJI.

DJI Care Refresh provides one year of service protection for DJI Osmo Mobile 7 series devices, covering damage such as collisions and contact with water. The plan includes two replacements for an additional fee of PLN 39 per replacement. Damaged equipment is replaced with a new or equivalent unit. The service must be activated within 30 days of the device’s first activation. Protection can be extended to a maximum of three years by purchasing additional annual plans. The manufacturer’s warranty remains valid throughout the service period. Eligible devices may also receive an additional year of warranty if the replacement service is not used during the coverage period.

DJI Care Refresh provides two years of service protection for compatible DJI products, with up to four replacements of damaged equipment for an additional fee. Coverage includes damage caused by collisions and contact with water. Damaged equipment is replaced with a new or equivalent unit under the service terms. For the DJI Osmo Action 3 series, each replacement costs PLN 119, although the fee may vary with exchange rates when contacting the manufacturer directly. The plan must be activated within 30 days of the device’s first activation. Coverage can be extended by one additional year through the purchase of another annual plan, bringing the total protection period to three years. The manufacturer’s warranty also applies during the service period.

DJI Care Refresh provides one year of service protection for compatible DJI products, with up to two replacements of damaged equipment for an additional fee. Coverage includes damage caused by impacts and contact with water. Damaged equipment is replaced with a new or equivalent-new product, subject to the service terms. For the DJI RS 3 Pro, the first replacement costs PLN 439 and the second PLN 569; these fees may vary with exchange rates when contacting the manufacturer directly. Activation must take place within 30 days of the device’s first activation. This 30-day activation period extension is not available for cameras, gimbals or stabilizers. The service is activated online using the Care Refresh code, device serial number and user details.